Excavator hydraulic rock splitter machine is also a common large-scale splitting machine. In modern life construction, construction workers can no longer use ordinary and traditional methods to operate the hard rock and boulder off the construction project. They can only split the rock through an effective and environmentally friendly physical method-splitting machine. This is the most advanced, environmentally friendly, and effective way to decompose hard rock!
Excavator hydraulic rock splitter machine, which we usually call large rock splitter machine, hydraulic splitting machine, etc., is a high-tech static stone crushing equipment developed and studied by YG Machinery. It uses an excavator as a platform Assist in splitting construction operations.
Working Principle of Excavator Mounted Hydraulic Rock Splitter:
The principle of the excavator hydraulic rock splitter is to increase the output pressure of the hydraulic system of the excavator through a supercharger and then drive the hydraulic cylinder of the splitter to form a driving force, which is transported to the large splitter through the hydraulic pump station of the excavator. The cylinder tube controls the push and contraction of the piston rod in the large splitting machine, and cleverly applies the principle of the wedge, which can generate a large splitting force after mechanical expansion. Although the external compressive strength of rock and concrete is very high, its internal tensile strength is relatively limited. It is precise because of these characteristics that the splitting machine can easily split the boulder within a few seconds to split the object (such as rock, reinforced concrete).
Construction Steps:
Select the piercing surface → drilling hole depth requirement (the depth is twice the length of the gun head, and the hole diameter is 3-5mm larger than the diameter of the gun head) → drilling position distance requirement (1-1.5 meters from the piercing surface, hole distance 1.2 —1.7m)→put the hole into the splitting machine→adjust the splitting direction→control the power station to split
Note: Every 5 to 10 holes need to be coated with high-temperature resistant grease between the split block and the wedge. This can increase the actual splitting force and also extend the life of the split block.
Application Areas:
Mining field: 1. Mine stone mining: granite, marble, sandstone, limestone, etc. 2. Metal mine, non-metal mine, and coal mining. 3. Mining of large blocks: It can realize the rupture of a block of several thousand cubic meters. Engineering field: municipal foundation, widely used in urban construction. Earth and stone excavation projects: mining, stone material factories, roads and bridges, houses, foundations, and other projects. Other areas: earthquakes, landslides, roads and railways, traffic accidents, disaster relief, etc.
Excavator Hydraulic Rock Splitter Manufacturer – YG Machinery
Compared with the traditional operation methods of the above-mentioned fields, the large-scale splitting machine of YG Machinery has the advantages of huge splitting force, simple structure, convenient operation, high operation efficiency, low cost, safety, and energy-saving management. At the same time, YG Machinery also has a DTH drill machine that can be used as a complete set. There are also small hydraulic rock splitter machines suitable for small projects and supporting gasoline rock drills machine. If you need them, please contact us immediately.
