2020年9月23日星期三
2020 YG Water Filling Machine|Water Bottle Filling Machine|Automatic Fil...
2020年9月18日星期五
Types of Water Well Drilling Rigs
Water well drilling rigs can be divided into three main categories, rotary water well drilling rigs, impact well-drilling machine, compound well drilling rigs. Rotary water well drill machine can be divided into large and small pot cone drilling machines, positive and reverse circulation rotary disk drilling machine, hydraulic well drilling machine, DTH impact rotary drilling rig machine, etc…

The Working Principle of Rotary Water Well Drilling Rigs
It mainly relies on the rotary motion of the drilling tools to break rock strata and form holes. Simple rotary well drilling equipment has only a drilling device, while a well-structured model has drilling devices and circulating well-washing devices. The drilling tools of rotary table type drilling equipment includes drill pipe and drill bits. The diameter of the commonly used drill pipe has six kinds of 60, 73, 76, 89,102, and 112mm and the drilling bits can be divided into two categories, full drilling bits, and annular drilling bits.

Large And Small Pot Cone Drilling Machine
It mainly uses its pot taper drill tool to rotary and cut the soil layer. Depending on the size of the drill string, they can be called large pot cones and small pot cones, which can be driven by humans or power.
Positive And Reverse Circulation Mud Washing Rotary Disk Drilling Machine

It is composed of towers, a hoist, a rotary table, a drilling tool, a mud pump, a faucet, and a motor. When it works, the power machine drives the rotary table through the transmission device, and the drill bit is driven by the active drill pipe to rotate the broken rock layer at a speed of 30-90r/min.
Pneumatic Well Washing Rotary Drill Machine
It uses an air compressor instead of a mud pump to clean well. It usually adopts the reverse circulation method, that is, compressed air is sent to the gas-water mixing chamber in the well through the gas supply pipeline so that it can be mixed with the water flow in the drill pipe to form the aerated water flow with the proportion less than 1. Under the action of gravity of the annular water column around the drill pipe, the aerated water flow inside the drill pipe carries rock debris continuously up and out of the well and flows into the sedimentation tank. Then the precipitated water flows back into the well in a self-flowing manner.
Hydraulic Power Head Rotary Drilling Rig Machine
The type is driven by a hydraulic motor through a reducer. The powerhead moving up and down the tower is used to drive the drill pipe and drill bit to rotate and cut rock layers instead of the rotary disc and faucet. It is characterized by fast drilling speed, while the loading and unloading of drilling tools and the downhole pipe are relatively simple.
DTH Vibratory Rotary Well Drilling Machine

It is a kind of rotary water well drilling equipment that drills into rocks formations by the connection of vibration and rotary motion. The excitation force produced by the vibrator causes the whole drill string to make conical pendulum motion. The drill bits are placed on the outside of the vibrator shell through a friction ring set. On the one hand, it vibrates horizontally with the vibrator at a frequency of about 1000r/min. On the other hand, it rotates around the axis of the vibrator at a low speed of 3-12r/min to break the rock strata, while the drilling pipe doesn’t turn. The well is cleaned by means of compressed-air reverse circulation, and the cuttings are discharged out of the well through the pipe and drill pipe cavity at the center of the vibrator.
Article Source: https://yugongmachinery.com/types-of-water-well-drilling-rigs/
2020年9月16日星期三
How are Nitrile Gloves Manufactured?
China’s top machinery manufacturer YG Machinery, due to Covid-19, has developed a new glove production line based on the original glove production line – Nitrile Glove Production Line/Nitrile Glove Making Machine, which we call the 2020 New Nitrile Glove Production Line. In the first half of 2020, we have reached agreements with the United States, Turkey, Vietnam, Thailand, and other countries. Among them, our American glove production line customers have received our machines and officially started production. If you want to invest in a glove production line will be a good choice and can bring you huge benefits. If you are interested in our glove making machine, please contact us for more information.

Why Use Nitrile Gloves?
Nitrile gloves are mid-to-high-end products. After special processing and formulation improvements, the breathability and comfort are close to latex gloves. It is widely used in the operation of semiconductors, precision electronic components and vicious metal utensils, high-tech product installation and debugging, LCD display tables, circuit board production lines, optical products, dust-free laboratories, hospitals, beauty salons, and other fields. In recent years, nitrile gloves have been used more widely in industries such as housework, chemistry, aquaculture, glass, food, and scientific research. Since customers choose nitrile gloves, it means that they have higher requirements for quality and use environment. Therefore, the market and living space of low-end nitrile gloves have been shrinking, and the production and sales of nitrile gloves have gradually concentrated on middle and high-end products. The quality requirements for products are getting higher and higher.The production technology of nitrile gloves has been updated rapidly in recent years. The new production technology represented by the unilateral two-hand mold process has greatly improved the production efficiency and has also given new entrants a clear advantage in latecomer.

Nitrile Gloves Features:
- Nitrile is a kind of rubber, mainly synthesized from acrylonitrile and butadiene, and is a key material for organic synthesis and pharmaceutical intermediates.
- The nitrile glove model is divided into non-slip palm numb surface and hand tip numb surface non-slip, overall numb surface non-slip, generally no powder.
- Nitrile gloves do not contain protein, amino compounds, and other harmful substances, and rarely cause allergies.
- Nitrile gloves are degradable, easy to handle, and environmentally friendly.
- The puncture resistance of nitrile gloves is three to five times higher than that of latex. For dentists who need to use sharp tools, durable nitrile gloves can create a safer barrier in contact with patients.
- Fit hand shape. Due to its good thermal conductivity, which provides excellent flexibility, which is particularly important for medical professionals or those who operate small parts or tools.
- The nitrile material can be added with pigments and the color is brighter. Can relieve the nervousness of patients.
- In addition, nitrile gloves have certain antistatic properties due to their non-silicon content, low surface chemical residues, low ion content, and small particle content, and are suitable for strict cleanroom environments.

Nitrile Glove Production Line Manufacturer – YG Machinery
Due to its excellent performance in antistatic, stretchability, comfort, oil resistance, etc., nitrile gloves are mainly used in the fields of medical protection and health protection for protection strength, dust resistance, chemical resistance, oil resistance, and mechanical protection Scenarios with higher requirements on sex, etc., belong to the higher-end products in disposable protective gloves. Compared with other glove varieties, nitrile gloves are a newly-added sunrise variety, gradually gaining user recognition globally, and there is a huge room for incremental demand. So it is a great opportunity for entrepreneurs to invest. If you are interested, please contact us. We also have other large-scale production lines, such as mask-making machine, melt-blown cloth machine, wet wipe machine, and so on.
Article Source:https://yugongmachinery.com/nitrile-glove-production-line/
2020年9月15日星期二
YG Pipe Shrinking Machine | Steel Tube Shrinking Machine | Pipe Shrink M...
YG Pipe Shrinking Machine | Steel Tube Shrinking Machine | Pipe Shrink Machine
The pipe shrinking machine is a hydraulic automatic pipe end processing machine that controls the end surface of the pipe under normal conditions.
【Whatsapp/Wechat/Phone/Skype】+8613613856800
2020年9月6日星期日
YG Sand Blasting Machine|Sandblasting Equipment|Mini Sandblaster|Wet San...
https://yugongmachinery.com/sand-blasting-machine-for-sale/ |
【Hot Sale】YG Sand Blasting Machine|Sandblasting Equipment|Mini Sandblaster|Wet Sandblasting Equipment |
【Want Price?】Leave your needs and WhatsApp/wechat/Email, we will send it to you. |
【Whatsapp/Wechat/Phone/Skype】+8613613856800 |
YG Automatic Water Filling Machine|Water Machine Filling|Water Bottle Fi...
https://yugongmachinery.com/water-bottle-filling-machine/
【Hot Sale】YG Water Filling Machine|Water Machine Filling|Water Bottle Filling Machine|Automatic Water Filling Machine |
【Want Price?】Leave your needs and WhatsApp/wechat/Email, we will send it to you. |
【Whatsapp/Wechat/Phone/Skype】+8613613856800 |
Best China YG Cotton Glove Machine|Knitted Gloves Machine|Glove Knitting...
https://yugongmachinery.com/knitted-gloves-machine/
【Hot Sale】YG Cotton Glove Machine|Knitted Gloves Machine|Glove Knitting Machine Price
【Want Price?】Leave your needs and WhatsApp/wechat/Email, we will send it to you.
【Whatsapp/Wechat/Phone/Skype】+8613613856800
2020年9月4日星期五
What Fog Machine is the Best?
A fog machine, fog generator, or smoke machine is a device that emits a dense vapor that appears similar to fog or smoke. This artificial fog is most commonly used in professional entertainment applications, but smaller, more affordable fog machines are becoming common for personal use. Fog machines can also be found in use in a variety of industrial, training, and some military applications. Typically, fog is created by vaporizing proprietary water and glycol-based or glycerin-based fluids or through the atomization of mineral oil. This fluid (often referred to colloquially as fog juice) vaporizes or atomizes inside the fog machine. Upon exiting the fog machine and mixing with cooler outside air the vapor condenses, resulting in a thick visible fog.
Ultrasonic fog smoke machine adopts integrated ultrasonic movement inside, no mechanical drive, no noise, high atomization efficiency, low failure rate, simple maintenance, automatic time control, the diameter of the mist particles output by the whole machine is only 1-10μ, box. The body is made of stainless steel, and the exterior is sprayed with plastic, which is beautiful and elegant and is equipped with a water tank. The disinfectant liquid is sprayed into the required disinfection room after ultrasonic atomization to achieve the purpose of disinfecting the air. The disinfectant mist particles are only Φ0.55mm, and all bacteria in the dead-end are killed when the space suspension time is more than two hours.

The Efficacy of the Disinfection Machine:
1. New cars quickly remove odor, smoke, and other unpleasant gases.
2. Multi-effect treatment, except formaldehyde, nicotine, TVOC, benzene.
3. No spice added, non-toxic care for mother and child safety.
4. Effectively prevent diseases and escort your health.

Operation Instructions:
1. Connect the atomizer to the power supply for about 5 minutes, after the heating is completed, the hand light of the machine lights up, put the pumping tube of the machine into the bottom of the potion bottle, start the car, turn on the air conditioner, and adjust the circulating wind speed to the first gear. The capacity to set the time for regular work. Please refer to 100ml potion for 5 minutes, 80 ml potion for about 4.5 minutes, 60 ml potion for about 4 minutes, try to avoid dry pumping.
2. Please turn off all electronic equipment during construction. There should be no obstruction within 30 cm of the air outlet of the equipment. Each construction needs to be covered with hard paper or wet towels to prevent damage to the leather chair.
3. It needs to be cleaned with clean water every time it is used up to prevent the pipeline from being blocked.

Use Environment:
1. Use net smell to remove formaldehyde in the car.
Let you be full of spirit and sunshine while driving. Don’t worry about whether your car “ has “ the presence of poisonous gas, fresh every day.
2. Use net flavor in home to remove formaldehyde.
Let you laugh at home with sunshine. Don’t worry about whether there are harmful objects such as ad formaldehyde and ammonia in your home. The whole family loves it!
3. Office use net smell to remove formaldehyde.
Let you have a refreshing good mood in the hard work of the day, at the same time can improve your work efficiency, the leaders start quickly, let your employees refresh every day!

Water Fog Machine Daily Maintenance:
In order to maintain the best performance and service life of the equipment, please clean the equipment frequently, please do not use other oily potions or fragrances to prevent blockage. The warranty period of this equipment is half a year. Improper and not covered by warranty.
About Spray Cannon Machine Manufacturer:
We have an excellent team, excellent talents, advanced equipment, high-quality products, and high-quality services that are fundamental to our foothold in the market. We have won the unanimous praise and support of our customers based on the principle of “ quality first, customers first”.
Our goal: improve the quality of products and services, and serve customers with high-quality products.
Our philosophy: the pursuit of details, excellence, self-improvement, and honest service.
Our development is inseparable from everyone’s support, we are committed to our own development while striving for a harmonious and win-win situation, and create a better future!
In YG Machinery, we also have other spray disinfection equipment for sale, such as fog cannon machine, knapsack sprayer, disinfection door, etc. If you need, please contact us as soon as possible!
Article Source: https://yugongmachinery.com/fog-smoke-machine/
Wet Tissue Machine Manufacturer-YG Machinery
As the flu season strikes, coupled with the spread of the new coronavirus, it is more important to clean your home. There are also many household cleaning products on the market that can help you do a good job of cleaning and effectively eliminate bacteria and viruses. Wet tissue is made of pure water, spun lace non-woven fabrics, and propylene glycol, which is used to wipe the face and hands or skin. At present, due to the new coronavirus, wet wipes have obviously become a must-have household item. The dosage is increasing, YG Machinery’s wet tissue machine can help you solve this problem. YG Machinery has a series of production lines with different specifications, which can certainly meet your requirements. We have two types of wet wipe production lines, fully automatic and semi-automatic. According to the differentiation of each pack of wet wipes, we have the single-piece wet wipes machine, 5~30 piece wet wipes machine, 30~120 piece wet tissue machine, as well as tube and bag packaging line. If you are interested, please contact us for more information.

YG Wet Tissue Machine Composition:
YG Machinery’s new wet tissue production line, the frame is sequentially installed with feeding and unwinding devices, traction and folding mechanism, liquid filling mechanism, cutting and stacking mechanism, covering mechanism, conveying table and packaging mechanism; feeding and unwinding device There are two unwinding units, and the two unwinding units are arranged side by side; the unwinding unit includes an unwinding rack on which a hydraulic lifting device is installed; the front end of the hydraulic lifting device is equipped with an automatic feeding device and an unwinding rack Our new wet wipes production line adopts an integrated setting, which avoids the unitary production of the previous wet wipes production equipment and ensures production efficiency and production quality.

Technical Field:
The new type of wet tissue production equipment is specifically a wet tissue production line that realizes the integration of the unwinding device, the traction, and folding mechanism, the liquid adding mechanism, the cutting, and stacking mechanism, the covering mechanism, the conveying table, and the packaging mechanism of the utility model.

Production requirements: suitable for wet wipes processing of spun lace non-woven fabrics, hot-tie cloth, hot-melt cloth, and hot-air cloth.
The Progress of the Machine:
Synchronous conveying-automatic folding-humidification-simultaneous pressing and drying-automatic rewinding-round knife cutting-transfer fixed-length cutting-completion.

Wet Wipes Machine Feature:
1. Control driving system: PLC, GOT operation interface, precision transmission by servo motor.
2. Unwinding mechanism: Independent drive of unwinding device, automatic control of tension.
3. Folding and traction mechanism: Various adjustable folding ways, synchronous transmission by servo traction.
4. Quantitative humidifying system: Two sets of shower pipes, uniform humidifying in 2.5-4.0 times scope.
5. Rotary cutting-off system: Cut off by rolling cutter synchronously, cutting length controlled precisely, flexible, and easy adjustable nonwovens length.
6. Folding and conveying device: Folded neatly by manipulators, synchronous, and flexible transmission of wet wipes.
7. Bag making and forming device: The tension of the film and width and height of packing bags can be adjustable automatically.
8. Packaging, cutting, and sealing device: Adopting Taiwan Rufong vertical sealing technology, advanced horizontal sealing of the Chinese mainland. The seal is firm and beautiful.
9. Safety guarantee system: Fixed, movable, and closed preventive device, conforming to ISO14120:20021.

Wet Tissue Machine Manufacturer – YG Machinery
There are two types of wet wipes on the market, one is sanitary wipes and the other is disinfection wipes. As the name suggests, disinfecting wipes have a powerful disinfecting effect. Most of the disinfectant wipes are made of disinfectant or alcohol, purified water is used as production water, and fabrics and dust-free paper are used as carriers. Disinfecting wipes can disinfect other items, such as disinfection or sterilization of skin abrasions and scratches. Therefore, disinfection wipes can be applied to the human body, general equipment, or medical equipment. Almost every family buys and uses disinfectant wipes, and its popularity is quite high. Disinfecting wipes can also easily deal with kitchen stains and can be used as soon as they are drawn, allowing families to easily deal with stubborn stains. YG Machinery’s wet wipe machine can also produce wet wipes for children, which is safe and hygienic. At the same time, YG Machinery also has shoe cover machines, glove making machines, PVC shoe making machine, umbrella making machines, etc. If you want to know more equipment information, please contact us for the latest information.
Article Source: https://yugongmachinery.com/wet-tissue-machine/