Concrete Laser Leveling Machine

Concrete laser leveling machine is mainly used for paving concrete for engineering buildings. It mainly uses the laser transmitter and the leveling machine to complete the leveling, vibrating and leveling work of the whole concrete. The concrete laser leveling machine uses a squeegee to take the raised shovel and initially level it to meet the design requirements. The hydraulically driven vibration motor generates vibration at a frequency of 4000 times per minute, which drives the entire vibrating plate to vibrate together. The concrete laser leveling machine has a construction width of 2.5-3 meters.

The machine does not need to pull the control line, nor does it need the side template to control the ground level, but the laser measurement and control system on the leveling machine controls in real time, as long as the laser transmitter is not disturbed, no matter where the leveler moves, it can ensure that the overall elevation of the paved ground is not affected.

Indoor:

1. Underground garage, general industrial plant, workshop, automated warehouse.
2. Clean electrical plants such as electronic appliances, food materials, and medicine.
3. Large warehouse supermarkets, logistics centers, convention centers, etc.

Outdoor:

1. Terminal, container yard, freight yard .
2. Airport runways, aprons, parking lots.
3. Squares, residential floors, municipal roads, etc.

Features:

The machine is divided into a hand-held type and a seat type. The equipment can be operated by a single person and applied to the floor construction, so that the heavy physical labor becomes mechanical paving, vibrating, leveling, pulping and plastering. The operator is greatly reduced, and the labor intensity is greatly reduced. The realization of large-area block-and-sprap construction makes it unnecessary to support the formwork in the middle of the block. It also reduces the construction process and speeds up the construction progress while reducing the formwork and channel steel. Work efficiency can reach 3000-5000 square meters per day.

Composition:

The principle of the concrete laser leveling machine is to rely on the gasoline generator to generate electricity. The electric drive laser measurement and control system, the computer control system and the servo drive system use the leveling head to complete the leveling work. The whole machine is composed of the fuselage and the leveling head. The flat is mainly completed by the flattening head part, which includes: a scraper, a vibrating unit, a vibrating plate, a laser receiver and the like. The instruments used with the concrete laser leveling machine are: laser emitters, hand-held laser receivers, etc.

Laser receiver:

The laser receiver is rechargeable and can be used for 20 hours on a single charge ( 6-8 hours full), covering a radius of 100 meters.

Working Principle:

The laser transmitter generates a rotating laser. The laser receiver on the leveling machine receives the signal and is analyzed by the laser measurement and control system. The deviation is fed back to the sensitive computer control system on the leveling machine. The left and right electric push rods will adjust the scraper. Height, ensuring leveling accuracy.

Definition:

Definition of laser leveling machine: A machine that is guided by a laser and used to level and level concrete.

Definition of laser leveling: When constructing a large-area concrete floor, a laser leveling machine is used to vibrate, level and control the concrete construction method of the new poured concrete.

The laser leveling technology mainly uses the laser transmitter and the leveling machine to complete the leveling, vibrating and leveling work of the whole concrete. Firstly, a fixed laser emitter is set, and the laser beam emitted by the transmitter is rotated to form a laser control plane. The floor elevation is guided to the leveling head of the floor concrete laser leveler by using a hand-held receiving rod, and the automatic control on the leveling machine is started. The system will adjust the laser signal ( at the frequency of 10 times/second) automatically according to the laser signal sensed by the laser receiver on the leveling head. Because the laser transmitter is fixed after being set up, it can ensure the construction of large area ground. Accumulated errors are generated and the error can be reduced to within 3mm.