Stucco Machine

Scope of Application:

Stucco Machine is suitable for indoor and outdoor wall spraying, cement mortar grouting, bridge grouting and waterproof surface spraying, fireproof spraying, ceiling spraying, wall spraying, paint spraying, garden spraying, relief effect coating spraying, sound-absorbing material spraying, waterproof plugging, waterproof patching lightweight and convenient for construction on bridges, dams, hillsides, basements, tunnels, and factory buildings.

Stucco Machine Adapts to Spraying Materials:

Putty powder, paint, latex paint, real stone paint, cement mortar, dry powder mortar, insulation mortar, waterproof material, fireproof material, heat insulation material, sound-absorbing material.

Features:

1. Adjust the flow to get the best spray effect.
2. In addition to the switch on the electric control box, it is also equipped with remote control switch spraying.
3. The connection between the spray gun and the feeding tube can be rotated for easy operation.
4. High construction efficiency and good quality.
5. Small size, convenient for on-site transportation, low cost of accessories and easy maintenance.
6. Easy to use, fast, material saving, labor saving, more money saving, one machine is only equipped with three people, 150 square/hour (2cm thickness).
7. Material ratio(cement) 0.7:3 mortar.

Advantage:

1. The rapid mortar spraying machine is designed reasonably, the pump and compressor are integrated, and the movement is convenient.
2. Screw mortar spraying machine feeds continuously without pulse.
3. The mortar spraying machine has wide practicality, can spray dry powder, mortar, and ordinary mortar.
4. Mortar sprayer sprays evenly and has strong adhesion.
5. Mortar spraying machine is fully functional, can spray or spray.
6. The direction of spray gun and nozzle connection can be selected for easy operation.

Note for Operators of Stucco Machines:

1. Hydropower should be available at the construction site, so that it is convenient to work.
2. The construction site should try to select those safe and level ground.
3. At the construction site, we should bring gloves, masks, goggles and hard hats to prevent accidents.
4. When the mortar spraying machine is working, the staff’s hands should bot be put into the bucket.
5. Mechanical and electrical circuits must be avoided from stacking in supermarkets and open spaces.

Maintenance and Repair:

1. After the sprayer equipment is finished, it should be cleaned in time, and the maintenance, maintenance and repair work should be done to keep the equipment in good condition.
2. Daily maintenance of the equipment should add lubricating oil according to its use requirements, keep the piston pump oil pipe open, and check the leak tightness of the overload safety valve and disassembly and assembly.
3. After one week or 50 hours of operation, check the seal of the pump body, cylinder, and bowl of the mortar unit, the tightness of the belt at the transmission site, the tightness and tightness of the pipe joints, clean the exterior of the pump, and supply thin oil to prevent dirt sticks.
4. The main components such as clutches, return unloading valves, reducers, air compressors should be regularly checked according to their use requirements. If it is worn or damaged, it should be adjusted and replaced in time.
5. Before grouting in the mortar mixer and mortar combination machine, clean the dirt from the oil injection and oil holes.

Stucco Machine Manufacturers:

The stucco machine is suitable for spraying walls of houses, spraying in basements and floors, spraying in basements and floors, spraying waterproofing materials for tunnels and heat insulation materials, and can spray pastes including paste slurry, wall mud, gypsum slurry, crushed stone, cement slurry, various types of additives, mortars, granules, and mortar products such as lime-cement mixes are fast and economical to use, especially for external wall insulation plasters, which are widely used today. The advantages of using this machine more obvious.