Anchor Drill Machine

Anchor drill machine is mainly used in landslides and dangerous rock mass anchoring projects in various geological disaster prevention and control of hydropower stations, railways and highway slopes, especially suitable for high slope rock mass anchoring engineering, and also suitable for deep foundation pit support and anti-floating in construction cities. Bolt and foundation grouting reinforcement hole, blasting hole of blasting project, high-pressure jet grouting pile, tunnel pipe support hole, etc., the power head is slightly changed, and it can be conveniently constructed in all directions.

Product Features and Method of Use:

1. The speed of this rig can reach 170 circles per minute.
2. Tracked drilling rigs are energy efficient. Improve efficiency without increasing power.
3. With the increase of the speed, the maximum speed can reach 7500NM.
4. Adopting new hydraulic system, the structure is simple, the layout is more reasonable, and the operation is more humanized.
5. The tunneling speed is fast, adapting to the doping process of rock and soil, and it has a strong impact on the hard rock in the soil layer when drilling the slope. The drill bit produced by YG Machinery Co.,Ltd can realize rapid advancement.
6. Reasonable hydraulic frame platform to reduce redundancy and improve overall coordination of equipment.
7. Multi-arm pitch adjustment, perfect for slope protection, foundation pit support, in line with industry-specific design.
8. Fuel-saving and durable, the use of large hydraulic tank, reasonable distribution of the flow direction of the hydraulic pipe, reducing fuel consumption.
9. Electric drive, low noise, suitable for urban construction deep pit support and slope stabilization of subway and airport.
   

                Anchor Drill Machine Usage:

   Urban deep foundation pit support, anti-floating anchor and foundation grouting reinforcement hole, blasting hole of blasting project, high pressure jet grouting pile, tunnel pipe shed support hole, etc.
   The design and development of anchor drilling rigs involves a high degree of demand in a variety of industry sectors, from field investigations and in-depth research, combined with modern new hydraulic principles, to create intelligent mechanized production equipment. We listened to the suggestions and expectations of the first-line workers on the construction site for drilling and drilling operations, in order to save manpower, design principles with small cost and high efficiency, using crawler hydraulics as the operating platform of the fuselage, using advanced hydraulic walking technology. Under the principle of controlling costs, the structural design of the drilling rig is enhanced to achieve a reasonable, perfect and stable purpose.

         Safety Engineering Procedures for Anchoring Engineering Drilling Rigs:

   1.Wear a safety helmet, lighting, and no alcohol before going to work.
   2.It is necessary to work for two or more people, and it is not allowed to work alone.
   3.Enter the work surface, first check the safety of the work surface, first discharge the top of the work surface, help the pumice, the umbrella on the slope, and keep the ventilation in the operation. The work site must be well lit and the work lights should be illuminated with 36 volts.
   4.The work site should be kept flat and it is strictly forbidden to stack obstacles.
   5.Before work, it is necessary to check whether the equipment is placed stably and firmly, whether the screws of each part are well fastened, whether the lubrication parts are normal, and the drilling can be started according to the procedure.
   6.When lifting or dismounting the rig with the lifting tool, it must be carried out with a qualified wire rope button and under the command of a special person. The lifting bracket must be fixed firmly. When lifting the object, the personal are not allowed to stay under the lifting object or in the offset direction to prevent danger.
   7.When two people carry the parts of the rig, they must have a good relationship with each other to prevent hand or lame.
   8.During the operation of the drilling rig, it is strictly forbidden to touch the anchor or the running part with your hands or gloves to prevent the racking.
   9.When transporting the rig with the vehicle, the rig must be firmly fixed to the vehicle with the rope. When the vehicle is reversed, no one is allowed to stay on both sides or behind the vehicle to prevent crushing.
   10.When blasting, you should hide in a safe place to avoid the gun. When the gun is fired inside, it should be evacuated to the outside of the cannon or to the safe place designed by the commander to avoid the gun.
   11.It is necessary to drill at the designed work place, and it is not allowed to go to other positions to prevent danger.

     Anchor Drill Machine Manufacturer：

   As a professional manufacturer of various types of machinery, the production of drill machine is our main business, including small water well drilling rig, core drilling rigs, DTH drilling rigs,  etc…  If you would like to purchase a anchor drill machine you can send us email from this page for quotation now. And if you are interested in other kinds of machinery in our company, you can visit the appropriate page to check more or contact us directly. We will reply you in 24 hours.