The sand blasting room is also called the shot blasting room and the sanding room. It is suitable for surface cleaning and rust removal of some large workpieces, and increases the adesion between the workpiece and the coating. The sand blasting room is designed according to the production process and the characteristics of the product itself. Suitable for surface derusting and rust removal of large castings, welded steel structures, engineering machinery, industrial boilers, chemical machinery, shipbuilding, etc. Strengthen, improve the adhesion of paint and so on. Its structure and supporting equipment are mainly composed of six parts: shot blasting room, shot blasting system, abrasive circulation system, ventilation and dust removal system, lighting and electrical control system. If you are interested in our machines, please feel free to contact us.
Features:
l Economic, efficient and pollution free.
l Complex workpieces of all sizes are well machined.
l Reduce working noise and extend service life.
l Provide dust-free protective accessories to ensure operator health.
l Equipped with advanced PLC system and high quality components.
l The size of the blasting room can be custom designed.
Design Feature:
The main feature of the sand blasting room is that the operator is indoors during the blasting process. Protective clothing and helmets protect the operator from abrasive impact, and the ventilator provides the operator with fresh air through the helmet. The blasting room is mainly used for large parts or with automatic blasting equipment to handle very expensive parts. The nozzle manipulator installed in the blasting room can automatically blast the surface of the part, and the hard-to-reach area of the automatic blasting can be done by manual blasting. This maintains flexibility and reduces the number of blasting operators. Abrasive delivery is another highlight of the design of the device. In addition to the well-known flat conveyor floor that requires a small installation depth, DISA has extensive experience in screw conveyors and vibrating cross-belt conveyor technology. Open blasting is generally used for large workpieces.
Design Basis:
The design of the blasting room should take into account the requirements of current users and various shipbuilding codes, as well as the new requirements of the IMO specification for painting. The design of the painting room not only shows the development level of contemporary international shipbuilding coating, but also the principle of practicality, achieving low investment and high efficiency, that is, lower operating cost, minimum maintenance probability and the easiest operation mode. Goal, get the most economic benefits. Th configuration of the coating equipment must be advanced, reasonable and effective.
The Design of the Blasting Booth Must Meet and Meet the Following Requirements:
1. Painting work normally in all weather.
2. The process equipment can operate at full load for a long time without trouble, and the whole of the sand blasting and painting booth adopts”no fault” design; Grid board.
3. The central centralized control system should meet the requirements of simple operation and high degree of automation of the process equipment system.
4. The process system should be advanced, practical and safe.
5. Improve the overall cost performance of the system by optimizing the design.
6. Economical, reasonable and comfortable ventilation, dust removal and paint mist treatment.
7. The production capacity of sand blasting and painting is basically up to the design requirements.
8. System equipment must be advanced and complete, and reduce the dependence on auxiliary services.
没有评论:
发表评论